blade &Base

 Centre Bevels

Centre Bevels

Blade beveled angle 42 ° and 30 ° The bevels with blades that are beveled at the angle of 42 ° and 30 ° are popular. Basically, the cutting blade is quite sharp and the bending blade is very hard from 0.7 to 23.6H, there are many different types of the bevels with the blade beveled at 42 °.

Double and triple long bevel

Double and triple long bevel

Compared with the side double bevels, this blade has remarkable length. It can easily cut into materials, this blade is highly suitable for thick materials. The bevel’s tip has a bigger bending angle compared with the blade; thus, the durability is higher. Thanks to the angulated joint the side single bevel cuts easier than the side double bevel. One-sided knife and the one-sided two-tier knife
 

Side Double Bevel

Side Double Bevel

We put pressure on the materials; in order to achieve a clean cut. The intersection angle is of higher quality when using the side single bevel in comparison to the side double bevel. However, materials with a large diameter and complicated shape are not suitable for the side single bevel. This bevel is more inclined to move during punching due to heavy loads; thus, the cut may be inadequate in comparison to the side double bevel that is more precise.
 

Drilled Punches(drilled punches with one-sided knives)

Drilled Punches(drilled punches with one-sided knives)

This type is popular.It is possible to wedge foam, rubber etc. into the drilled punches. The cutting lines are better than if using the Feed Through Punches and Side Ejector Punches. The knife is about 0.7mm thick (fromφ30 or more, the knife is 1.0mm thick).The one-sided knife is the same thickness.(The spacing rule of standard dimensionsis 0.5mm)
 

Spring punches

Spring punches

These are the punches with springs inside.Spring punches are favorable as rubber wedging is not necessary. They are more expensive than the common drilled punches.The diameter is from φ1 to φ15. The odd φ can be created.
 

Welded circle knives

Welded circle knives

The cutting line is very nice due to the rounded head design. It can be used in the same way as the Drilled Punches. The welding joints can be opened. It is suitable for foam or thin rubber materials.
 

Feed Through Punches

Feed Through Punches

The punch has straight and thick pipes. They are suitable for hard and thick materials. The waste material iscollected inside the pipe, this makes it convenient. They are more expensive than the common drilled punches. The common drilled punches have better cutting lines. The diameter is from φ1 to φ40. (From φ13 or more, the spacing rule of standard dimensions is 1.0mm).
 

Side Ejector Punches

Side Ejector Punches

This type is a modification of the Feed Through Punches. As the waste material is collected from the side of drilled punches, the punches are made much more than Feed Through Punches. The feed box must be put on the base of the side ejector punches. This type is a lot more expensive. The diameter is from φ1 to φ10. The type of φ11/ φ12 should be ordered separately. For larger punches, we cannot make the feed box of 23.6 in height.
 

Plywood die bed

Plywood die bed

This is the commonly used die bed. This type is considered the best as it has multi-purposes and a balance between quality and price.
 

Kaba wooden die bed  (hard plywood)

Kaba wooden die bed (hard plywood)

This is the hardwood die bed; used for materials that are easy to be stripped and easily moved, it can be used to strengthen the force of the entire knife.
 

ABS plastic  (AcrylonitrinButadienStyren)

ABS plastic (AcrylonitrinButadienStyren)

Between all the types of plastic, this type is the easiest to clean and is the strongest. Plywood is also used as the core for easily crushed drilled punches during the punching process.
 

Acril

Acril

This is a transparent material; very useful for punching directly on the materials.
 

PP composition board

PP composition board

This is the PP composition board glued to the base. Compared with other types of boards this type is the cheapest.